TTCIWS TECHNOLOGY- TECHNOLOGY FORUM FOR SOFTWARE PHONES - PC
هل تريد التفاعل مع هذه المساهمة؟ كل ما عليك هو إنشاء حساب جديد ببضع خطوات أو تسجيل الدخول للمتابعة.

Itel A14 Flash File | Frp | Dead | Hang Logo

اذهب الى الأسفل

Itel A14 Flash File | Frp | Dead | Hang Logo Empty Itel A14 Flash File | Frp | Dead | Hang Logo

مُساهمة من طرف Admin الخميس أكتوبر 17, 2019 5:10 pm


Itel A14 Flash File | Frp | Dead | Hang Logo


http://gsmallrepair.com/2019/07/12/itel-a14-flash-file-frp-dead-hang-logo/

The iTel A14 comes with a 4.0 inch display and boasts of a 1.2 GHz Dual core processor with Android 8.1, Oreo (GO Edition). It also comes with a 512 MB of RAM, an internal memory of 8 GB. It has a back/ rear camera of 2 MP and an 0.3 MP front camera with a 1500 mah Li-Po battery capacity to push all this.

Network: 2G – Yes, 3G – Yes , 4G – N/a
Operating System: Android 8.1, Oreo (GO Edition)
Processor / GPU: 1.2 GHz Dual Core Cortex A7 / Mali 400
Display / Resolution: 4.0 Inches / 800 x 480 pixel
RAM: 512 MB
Internal / External Memory: 8 GB / Expandable by up to 32 GB
Camera: Back / Rear (2 MP), Front (0.3 MP)
Battery Capacity: 1500 mAh Li-Ion
Sensors: Accelerometer,Proximity, Light, Compass
Itel A14 Flash File | Frp | Dead | Hang Logo ITEL A14
Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the itel A16 Hyphone firmware.PAC file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Step 13. done.

FIRMWARE AND FLASH TOOL

Download

a14www.gsmallrepair.com

https://www.mediafire.com/file/fg6p2gi28awp712/a14www.gsmallrepair.com.rar/file


Admin
Admin
Admin

المساهمات : 684
تاريخ التسجيل : 16/01/2017

https://ttciws-net.yoo7.com

الرجوع الى أعلى الصفحة اذهب الى الأسفل

الرجوع الى أعلى الصفحة

- مواضيع مماثلة

 
صلاحيات هذا المنتدى:
لاتستطيع الرد على المواضيع في هذا المنتدى